Stair Handling

Portable Material Lift

A compact lift for panel, pipe and duct handling where a platform machine will not fit.

Model range: PM Series
Models: 2 configurations
Loading port: Shanghai Port
Trade terms: FOB / CIF / DDP

[X] Year machine warranty4 wear part groups stockedExport wooden case

PM Series · Stair Handling

PM Series series

The PM series is the entry model for service technicians and small contractors. It folds into a van, sets up in minutes and lifts loads to first-floor or mezzanine level without a second operator.

Configured model

Rated capacity: 300 kg
Max lift height: 5.0 m
Power system: Manual winch
Net weight: 98 kg

[WHATSAPP_PLACEHOLDER]Engineering reply typically within 12 business hours

Technical data

Engineering specification matrix

Units

PM-200 outline

[PRODUCT_CAD_PLACEHOLDER]

Dimension drawing issued for approval before production. Pit or floor fixing requirements are confirmed on the same drawing.

Model Code	Rated Capacity	Max Lift Height	Collapsed Dimensions	Power System	Net Weight	Wooden Case Dimensions
PM-200	200 kg	4.2 m	1,250 × 720 × 1,600 mm	Manual winch / 8 m cable	78 kg	1,400 × 850 × 1,750 mm
PM-300	300 kg	5.0 m	1,350 × 760 × 1,750 mm	Manual winch / 10 m cable	98 kg	1,500 × 900 × 1,900 mm

Model CodePM-200

Rated Capacity: 200 kg
Max Lift Height: 4.2 m
Collapsed Dimensions: 1,250 × 720 × 1,600 mm
Power System: Manual winch / 8 m cable
Net Weight: 78 kg
Wooden Case Dimensions: 1,400 × 850 × 1,750 mm

Model CodePM-300

Rated Capacity: 300 kg
Max Lift Height: 5.0 m
Collapsed Dimensions: 1,350 × 760 × 1,750 mm
Power System: Manual winch / 10 m cable
Net Weight: 98 kg
Wooden Case Dimensions: 1,500 × 900 × 1,900 mm

Values apply to standard configuration; custom voltage, deck extension and branding are confirmed on the order drawing.

Packing & logistics

How the machine leaves the factory

[PACKING_IMG] · Fumigation-free export case

Gross weight (per case): 130 kg
Case dimensions: 1,500 × 900 × 1,900 mm
Loading port: Shanghai Port
Trade terms: FOB / CIF / DDP

Six units load into a 20GP as LCL cargo, which keeps landed cost low for dealers trialling the model.

Moisture barrier film and desiccant inside the case
Case marks and packing list issued before loading
Loading photos shared ahead of vessel departure

After-sales

Warranty, wear parts and commissioning

Complete machine

[X] Year

Cover against manufacturing defects on structure, hydraulics and electrical components.

Wear parts

[X] Months

Wheels, seals, handles and batteries replaced under the wear-part policy when inspected on schedule.

[Part drawing]

Wheel and caster set

Inspect every 250 operating hours; replace in pairs

[Part drawing]

Hydraulic seal kit

Replace at first sign of seepage or pressure loss

[Part drawing]

Control handle assembly

Check switch response during the daily inspection

[Part drawing]

Battery and charger

Capacity check each quarter; deep-cycle battery

Installation guidance

Cable replacement is covered under the wear-part policy. Load limits must not be exceeded when lifting panels with a large wind area. Spare parts are despatched by courier once the part number and photos are confirmed.

Questions

Answers before you enquire

Voltage, lead time, sample orders and packing questions come up on almost every enquiry. If yours is not covered, send it with the form.

Selected model

PM-200

Capacity 200 kg · Lift 4.2 m

The machine is built for one input voltage, because the motor, charger and control transformer are matched during assembly. Tell us the destination country and we configure 110V with a US plug or 230V with an EU or UK plug before testing.

Standard configuration is 15–20 days from deposit confirmation. Custom branding, non-standard voltage and mixed-model containers add time to the schedule, and the confirmed date is written into the order confirmation.

Yes. Sample orders of one unit are accepted so you can inspect the finish and run a site test. Sample freight is quoted at cost, and the difference is credited against a follow-up bulk order of eleven units or more.

Units ship in fumigation-free wooden cases with moisture barrier film, secured to the case base. Case dimensions, gross weight and marks are issued on the packing list before loading so your broker can pre-clear the shipment.

FOB from Shanghai Port is the standard basis. CIF to your destination port and DDP to door are quoted on request with the final address and postcode, so duty and inland delivery are included in one figure.

Request for quotation